IAC Trouble
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Having odd idling issues now that my swap is up and runnning. The car wouldnt idle at all, after testing some things I replaced the IAC motor and ran a ground wire to the TB and it solved the problem... I thought. The car will idle fine all the way up to opertating tempature, no problem. If I cut the car off and re start it, it will not idle period. I can cut it off and start it over and over again and it wont idle. If I leave it alone for a couple hours to cool off, it starts up and idles fine untill I cut it off again.
This thing is driving me crazy.
This thing is driving me crazy.
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The IAC valve is supposed to retract upon cycling the key, perhaps it is getting stuck or you have a wiring issue causing the pintle to not retract and keep the idle set too low.
#3
12 Second Club
Join Date: Jan 2009
Location: Laffeyette
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This may help try to reset the PCM for that sensor. Unplug the IAC and the TPS turn the key on for a few then back off. Plug the sensors back in and turn the key on it will reset It.