Control Circuit Cylinder #6?
Thread Starter
11 Second Club
iTrader: (8)
Joined: Mar 2007
Posts: 569
Likes: 3
From: Windsor, Ontario Canada
Control Circuit Cylinder #6? Okay i finally got my turbo iroc built LQ4 swap finished and I cant figure out what this issue is!
I get a P0356.
I tried...
Changing #6 plug
Swapping coils
Swapping wires
Swapping coil harness'
Also checked the resistance from the pcm pin to the coil pin.
Still have the code....So could this be a PCM issue?
Thanks
Jay
I get a P0356.
I tried...
Changing #6 plug
Swapping coils
Swapping wires
Swapping coil harness'
Also checked the resistance from the pcm pin to the coil pin.
Still have the code....So could this be a PCM issue?
Thanks
Jay
Last edited by jay_rich; Aug 9, 2010 at 07:30 PM.
Thread Starter
11 Second Club
iTrader: (8)
Joined: Mar 2007
Posts: 569
Likes: 3
From: Windsor, Ontario Canada
Figured it out, ran a new wire from the pcm to the coil plug on the main harness and no more codes!
The backfiring was due to more fueling needed under 4000rpm. Pretty much go it smoothed out.
Jay
The backfiring was due to more fueling needed under 4000rpm. Pretty much go it smoothed out.
Jay
