What Pieces to a wideband do I need?
12-14-2010, 10:25 AM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jul 2010
Location: Blacksburg VA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
What Pieces to a wideband do I need? I've seen where I can get the sensor seperate form the the handheld gauge and other pieces.
Just ordered HP Tuners VCM Pro and I'm now on the hunt for a wideband. I figured I'd use an LM1 but didn't know if I needed to get the whole kit or is there only a few pieces required? Does HP read the A/F from the sensor to my laptop?
Just ordered HP Tuners VCM Pro and I'm now on the hunt for a wideband. I figured I'd use an LM1 but didn't know if I needed to get the whole kit or is there only a few pieces required? Does HP read the A/F from the sensor to my laptop?
12-14-2010, 06:47 PM
#3
Agreed.
I ordered mine at the same time from the same place and the wide band had this little "brain" thing that plugged into it which allows it to interface to my HPT connector which then interfaces to my laptop via HP Tuners... Got it? Good, there will be a test.
I ordered mine at the same time from the same place and the wide band had this little "brain" thing that plugged into it which allows it to interface to my HPT connector which then interfaces to my laptop via HP Tuners... Got it? Good, there will be a test.