PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

Timing and afr

Old May 20, 2011 | 05:06 PM
  #1  
dkiller2135's Avatar
Thread Starter
Staging Lane
 
Joined: Aug 2010
Posts: 89
Likes: 0
From: Calhoun Ga
Default Timing and afr

This cars timing was set as 60. And the afr was at 14.5. Was that a nitrous tune? What is stock timing and afr?
Reply
Old May 20, 2011 | 07:53 PM
  #2  
DynoDR's Avatar
TECH Apprentice
iTrader: (1)
 
Joined: Jun 2004
Posts: 379
Likes: 0
Default

I don't think so. How do you know? No! It is not just one value.
Reply
Old May 20, 2011 | 08:38 PM
  #3  
NoGo's Avatar
TECH Addict
20 Year Member
Photogenic
Photoriffic
iTrader: (2)
 
Joined: Jan 2002
Posts: 2,814
Likes: 110
From: Mass
Default

Typical nitrous timing while on the spray on a vette is ballpark 15 to 25 depending on the size of the shot.

AFR on nitrous should be 11.5 to avoid turning the big pieces into little pieces.
Reply
Old May 23, 2011 | 06:23 PM
  #4  
dkiller2135's Avatar
Thread Starter
Staging Lane
 
Joined: Aug 2010
Posts: 89
Likes: 0
From: Calhoun Ga
Default

This tuner on the car has value bars and that is what they are set to. I guess they may be limits but that is the setting. This car burns oil and only has 91k so I imagine that the rings are burnt due to nitro
Reply
Old May 23, 2011 | 06:33 PM
  #5  
thompson's Avatar
Banned
iTrader: (4)
 
Joined: Jan 2010
Posts: 914
Likes: 17
Default

what are you looking at that shows 60* and 14.5 afr? have you taken any data logs? look at your af sensors under wot what are they and what is the timing and KR*?
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:57 PM.