swapping PCM's
Thread Starter
TECH Fanatic
iTrader: (25)
Joined: Dec 2005
Posts: 1,206
Likes: 0
From: Denton, Texas
swapping PCM's I am in the process of going from an 01 3.8L camaro to an LS2 and I will be using an fbody LS1 PCM/harness. Someone pm'd me the statement below and I was wondering if it was true and what is the easiest way to get around to it without having to buy EFI live or HP Tuners.
"You will have to register the new PCM with hp tuners or EFI live with the current o/s on your car. if you try to put a pcm with a different vin in the car with vats it won't start."
"You will have to register the new PCM with hp tuners or EFI live with the current o/s on your car. if you try to put a pcm with a different vin in the car with vats it won't start."
Last edited by 01CaMMMaro; Aug 11, 2011 at 05:33 PM.
Thread Starter
TECH Fanatic
iTrader: (25)
Joined: Dec 2005
Posts: 1,206
Likes: 0
From: Denton, Texas
if this is true, id really like to just send my PCM in and get my vin code on it so the car will start. I am getting a dyno right away so I just need it to start.
You can send me your PCM, and I can put a baseline tune in it that will start your car. If interested, email me at the address in my sig. We'll discuss the details then.
