Can someone please point me in the right direction?
08-14-2011, 06:48 AM
#1
Can someone please point me in the right direction? Ok here is the deal. I have a set of high z 115lb injectors from FIC, I input all the information given to me into HPT. In order for me to make the car idle I have to play with the throttle to make it idle. I actually have to keep the car at about half to a quarter throttle until the car warms up. When the car warms up it idles fine, but when I give it some gas the car dies out. Also the car will only idle if I scale my injectors to 160-170lb's. Right now the car has 93 octane gas and it is a Forced Inductions motor and has a large turbo on it.
The car is extensively modded. Throws no check engine lights. As far as what else is going on I am totally clueless. I had the injectors flowed and tested and they all checked out fine. I have attached my HPT file for anyone to look at to give me an idea what I'm doing wrong.
Any help would be greatly appreciated.
The car is extensively modded. Throws no check engine lights. As far as what else is going on I am totally clueless. I had the injectors flowed and tested and they all checked out fine. I have attached my HPT file for anyone to look at to give me an idea what I'm doing wrong.
Any help would be greatly appreciated.
