1st diagnostic
Thread Starter
Registered User
Joined: Apr 2011
Posts: 12
Likes: 0
From: Houston, TX
1st diagnostic Just got an INNOVA 3160 in, so I wanted to check out my car at idle. Plan was to use supplied software to view it on my PC, but I found out an adapter is needed that I don't have, so is on order now 
. So, if anyone of you would care to tell me anything you see good/bad based on the numbers Id appreciate it, if not i'll just wait for my adapter lol.
CALC LOAD = 1.9%
ECT = 190°f
STFT B1 = 0.7%
LTFT B1 = -1.5%
STFT B2 = 0.7%
LTFT B2 = -0.7%
MAP = 10.6 inHg
ENG RPM = 665
SPARK ADV = 17°
IAT = 111°f
MAF = 0.843 LB/MIN
TPS = 0%
AIR STATUS = OFF
O2S B1 S1 = 0.325V
STFT B1 S1 = 2.3%
O2S B1 S2 = .435V
STFT B1 S2 = NA %
O2S B2 S1 = 0.155V
STFT B2 S1 = 1.5%
02S B2 S2 = 0.825V
STFT B2 S2 = NA %
. So, if anyone of you would care to tell me anything you see good/bad based on the numbers Id appreciate it, if not i'll just wait for my adapter lol.CALC LOAD = 1.9%
ECT = 190°f
STFT B1 = 0.7%
LTFT B1 = -1.5%
STFT B2 = 0.7%
LTFT B2 = -0.7%
MAP = 10.6 inHg
ENG RPM = 665
SPARK ADV = 17°
IAT = 111°f
MAF = 0.843 LB/MIN
TPS = 0%
AIR STATUS = OFF
O2S B1 S1 = 0.325V
STFT B1 S1 = 2.3%
O2S B1 S2 = .435V
STFT B1 S2 = NA %
O2S B2 S1 = 0.155V
STFT B2 S1 = 1.5%
02S B2 S2 = 0.825V
STFT B2 S2 = NA %
