Am trying to find any info on HPT being able to run dual injectors (for a total of 16) or is this going to be a aftermarket PCM? Thank you in advance.

 

More a PCM based problem than a HPtuners Problem

only has 8 drivers and needs high impedance injectors

 

i went through all this **** on my race car, i used a factory PCM to control 8 injectors then another fuel controller to control another 8 and it was a night mare...

i just pissed it all off and went with a PS2000 haltech system. so much easier and it all interfaces directly with the IQ3 racepak dash,

i run 16x bosch 2000cc injectors and it makes over 1150rwhp on 19psi

 

very well, aftermarket PCM it is. thanks for yalls help