PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

2bar cobalt map sensor

Old Jun 6, 2012 | 12:47 AM
  #1  
02LS1ram's Avatar
Thread Starter
TECH Enthusiast
iTrader: (17)
 
Joined: Apr 2008
Posts: 579
Likes: 0
From: Lehigh Valley ,PA
Default 2bar cobalt map sensor

Does anyone who the part number for the cobalt MAP everyone uses? Idk which map to use. I know whose cars came supercharged then went turbo so Idk which year to use one from
Reply
Old Jun 6, 2012 | 03:43 PM
  #2  
02LS1ram's Avatar
Thread Starter
TECH Enthusiast
iTrader: (17)
 
Joined: Apr 2008
Posts: 579
Likes: 0
From: Lehigh Valley ,PA
Default

Anyone? I know they use them alot just Need a little insight
Reply
Old Jun 6, 2012 | 09:28 PM
  #3  
02LS1ram's Avatar
Thread Starter
TECH Enthusiast
iTrader: (17)
 
Joined: Apr 2008
Posts: 579
Likes: 0
From: Lehigh Valley ,PA
Default

Bump.....
Reply
Old Jun 7, 2012 | 05:53 AM
  #4  
BLK02WS6's Avatar
9 Second Club
iTrader: (2)
 
Joined: Jul 2002
Posts: 2,583
Likes: 1
From: on the dyno tuning in MD
Default

GM part# 12580698
Reply
Old Jun 8, 2012 | 06:11 AM
  #5  
02LS1ram's Avatar
Thread Starter
TECH Enthusiast
iTrader: (17)
 
Joined: Apr 2008
Posts: 579
Likes: 0
From: Lehigh Valley ,PA
Default

Thank you for that part number. How much psi are these cobalt MAPS good up to 15-17 range? Just curious bc I plan to be between 10-12.
Reply
Old Jun 8, 2012 | 04:09 PM
  #6  
BLK02WS6's Avatar
9 Second Club
iTrader: (2)
 
Joined: Jul 2002
Posts: 2,583
Likes: 1
From: on the dyno tuning in MD
Default

A 2 Bar sensor is good to roughly 14.7# (you take off one Bar for atmospheric and you get one Bar for boost)... You will be fine at 12#
Reply
Old Jun 8, 2012 | 09:17 PM
  #7  
HIPSI's Avatar
TECH Apprentice
iTrader: (2)
 
Joined: Jun 2008
Posts: 362
Likes: 0
From: Long Beach,Ms
Default

The part # I have is 12615136
Reply
Old Jun 9, 2012 | 06:38 AM
  #8  
BLK02WS6's Avatar
9 Second Club
iTrader: (2)
 
Joined: Jul 2002
Posts: 2,583
Likes: 1
From: on the dyno tuning in MD
Default

Originally Posted by mudmanmatt
The part # I have is 12615136
Apparently that is an updated part # for the same sensor I said above - good info...
Reply
Old Jun 9, 2012 | 08:04 PM
  #9  
02LS1ram's Avatar
Thread Starter
TECH Enthusiast
iTrader: (17)
 
Joined: Apr 2008
Posts: 579
Likes: 0
From: Lehigh Valley ,PA
Default

Thanks for all the help guys
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:21 AM.