PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

lean condition on take off, help please

Old Jul 5, 2012 | 08:46 PM
  #1  
35th camaro's Avatar
Thread Starter
TECH Apprentice
 
Joined: Aug 2009
Posts: 389
Likes: 0
From: NB Canada
Default lean condition on take off, help please

i have been having issue's with my car when i leave a stop light, it will pop in intake and bog then pick-up , i look at my a/f meter and goes to 16. i have tried adding fuel at that point of air flow and has had no change, is there another setting with hp tuner that i can add fuel as i touch the trottle? any help would be apreciated, thanks. 402 with 236-242 cam and fast 102 intake and t/b with 100mm maf.
Reply
Old Jul 5, 2012 | 08:49 PM
  #2  
35th camaro's Avatar
Thread Starter
TECH Apprentice
 
Joined: Aug 2009
Posts: 389
Likes: 0
From: NB Canada
Default

my wot a/f ratio is aprox 12.5 average accross the full rpm range, only on the initial touche of the accelerator pedal does it go lean.
Reply
Old Jul 5, 2012 | 08:51 PM
  #3  
MontecarloDrag's Avatar
10 Second Club
iTrader: (3)
 
Joined: Aug 2005
Posts: 889
Likes: 6
Default

Set it to full open loop, disable all trims.
Then open the scanner and reset fuel trims

Test to see if it does the same
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:34 PM.