dtc removal now some issues
dtc removal now some issues I removed my evap codes with hptuners to get rid of the ses since i removed evap going to my vic jr. intake. The car seemed to run good before but now it idles about 70 rpm lower than previous and wants to stall out on take off. It pops at idle and now does the high idle until complete stop.
Is this because it reset all the learned ltft's and stuff like that and the tune isnt for my vic jr and 4150 tb other than that there has been no other changes from the fast setup.
Is this because it reset all the learned ltft's and stuff like that and the tune isnt for my vic jr and 4150 tb other than that there has been no other changes from the fast setup.
"and the tune isnt for my vic jr and 4150 tb other than that there has been no other changes from the fast setup."
So, it appears you have changed from a FAST intake, to an Edel/tb setup??
If so, I'd suggest a tune is in order...
Data log it, and see WTF is going on..........
So, it appears you have changed from a FAST intake, to an Edel/tb setup??
If so, I'd suggest a tune is in order...
Data log it, and see WTF is going on..........
