tachometer/speedo/odmeter ???
tachometer/speedo/odmeter ??? ok so ive done a ls1 swap in my 85 fox and im using the cluster out of a 2000 camaro..my gauge lights and everything are working, i wired up the data link connector with the pinouts i had from alldata at my work. But when i turn the key on that odometer box isnt turning red or anything and also the tach and speedo arent doing anything either. is there somthing i missed?
Tach signal comes from serial data bus, speedometer signal comes from PCM pin 55 and odometer is also serial.
If you wired it correctly, the cluster may be bad, I have seen a few like that, some gauges work some don't and it was a bad cluster, changed it and everything worked with no wiring changes.
If you wired it correctly, the cluster may be bad, I have seen a few like that, some gauges work some don't and it was a bad cluster, changed it and everything worked with no wiring changes.
well i really hope their is nothing wrong with the cluster cause its a bitch to get out..but ok ill check that stuff and if it doesnt work i guess ill just have to wait and see when i can find a different one out of someones camaro when they arnt looking.
can you make me a drawing of the wireing schematics for the serial data bus? the little rectangular splice pack..? and where the tach wire runs and stuff for a swapped car..please
