Power issues
Thread Starter
Teching In
Joined: May 2013
Posts: 9
Likes: 0
Power issues I FINISHED MY INSTALL, 99 LS1 CORVETTE ENG. INTO 85 C4
I WILL KEEP IT SHORT TILL I SEE IF I GET ANY TAKERS TO HELP ME
IT STARTS,RUNS AND DRIVES GREAT, I PUT ABOUT 100 MILES ON IT WITH NO PROBLEMS
MY ISSUE IS AT FULL THROTTLE IT FEELS LIKE 1/2 TO 3/4 THROTTLE
IT JUST DOESENT PULL HARD,
I ALSO OWN A C5 1997 SO I KNOW HOW IT SHOULD PULL
MY INSTALL ITEMS ARE
99 LS1 ENG
99 PCM VATS AND JUNK DELETE
STAND ALONE HARNESS
78mm CABLE T.B.
4L60E TRANS
373 GEARS
IF ANYONE CAN HELP ME DIG DEEPER THEN LET ME KNOW
P.S. T.B. IS OPENING 100% AND TPS IS SET AND FUEL PRESSURE IS 55LBS
I WILL KEEP IT SHORT TILL I SEE IF I GET ANY TAKERS TO HELP ME
IT STARTS,RUNS AND DRIVES GREAT, I PUT ABOUT 100 MILES ON IT WITH NO PROBLEMS
MY ISSUE IS AT FULL THROTTLE IT FEELS LIKE 1/2 TO 3/4 THROTTLE
IT JUST DOESENT PULL HARD,
I ALSO OWN A C5 1997 SO I KNOW HOW IT SHOULD PULL
MY INSTALL ITEMS ARE
99 LS1 ENG
99 PCM VATS AND JUNK DELETE
STAND ALONE HARNESS
78mm CABLE T.B.
4L60E TRANS
373 GEARS
IF ANYONE CAN HELP ME DIG DEEPER THEN LET ME KNOW
P.S. T.B. IS OPENING 100% AND TPS IS SET AND FUEL PRESSURE IS 55LBS
