Question: Which ECM for swap
08-19-2014, 04:50 PM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Sep 2004
Location: Stuart, Florida
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Question: Which ECM for swap Hi Guys,
Can a truck or Van ECM with 6.0 and 4L80 be used in my swap to run a Corvette DBW throttle body.
Currently Have
LQ9 with LS2 Heads Intake, cam and LS2Throttle body
99 Corvette gas Pedal and TAC Module
4L80 from 2000 Van
Blue and Red Connector stand Alone Harness setup for 4L80.
Trying to figure out which tune to use to get her running,currently have a 99 Corvette ECM with manual trans but was told there's no 4L80 segment swap for my current OS, figure the truck ECM has 6.0 and 4L80 in it but don't know if I can run a Corvette throttle body with it.
Suggestions Please
Thanks
Can a truck or Van ECM with 6.0 and 4L80 be used in my swap to run a Corvette DBW throttle body.
Currently Have
LQ9 with LS2 Heads Intake, cam and LS2Throttle body
99 Corvette gas Pedal and TAC Module
4L80 from 2000 Van
Blue and Red Connector stand Alone Harness setup for 4L80.
Trying to figure out which tune to use to get her running,currently have a 99 Corvette ECM with manual trans but was told there's no 4L80 segment swap for my current OS, figure the truck ECM has 6.0 and 4L80 in it but don't know if I can run a Corvette throttle body with it.
Suggestions Please
Thanks
