Long term bank 2 weird reading????
#4
12 Second Club
Thread Starter
Join Date: Apr 2002
Location: Cave Creek, AZ- Canada Also.
Posts: 680
Likes: 0
Received 0 Likes
on
0 Posts
We did our own splicing of wires to extend the passenger side O2 hook up.i wonder if the computer is reading to much resistance or something.We were very careful in cutting and soldering and shrink tubing.We did use the same gage wire.I also did use some foil tape to protect even further the wires.
Hmmmm
Hmmmm
#6
12 Second Club
Thread Starter
Join Date: Apr 2002
Location: Cave Creek, AZ- Canada Also.
Posts: 680
Likes: 0
Received 0 Likes
on
0 Posts
Dave Im not sure????
Im going to switch the passengers side post O2 sensor with the pre O2 sensor passenger and see if its the O2 sensor.
Im going to switch the passengers side post O2 sensor with the pre O2 sensor passenger and see if its the O2 sensor.
Trending Topics
#10
12 Second Club
Thread Starter
Join Date: Apr 2002
Location: Cave Creek, AZ- Canada Also.
Posts: 680
Likes: 0
Received 0 Likes
on
0 Posts
Well I just went out and cleaned the 2 passenger side O2's.They both had a little black soot on them.Then I switched them front to back.
No more funny numbers on bank 2.They all go to zero at WOT.
Now time to set my enrichment and go from thier.
Thanks for your input.
Hope this clears things up.
No more funny numbers on bank 2.They all go to zero at WOT.
Now time to set my enrichment and go from thier.
Thanks for your input.
Hope this clears things up.