Wideband Bung location
Thread Starter
On The Tree
Joined: May 2014
Posts: 179
Likes: 0
From: FortLauderdale/Orlando
Wideband Bung location I finally got hpt and I'm now in need of a wideband.
Each of my LT's have a bung at the collector and is the current location for the 2 narrowband sensors. Being that the drivers collector is the most ideal location for a wideband, can I relocate the narrowband to the location of the disabled secondary sensor and put the wideband in its place?
Thanks!
Each of my LT's have a bung at the collector and is the current location for the 2 narrowband sensors. Being that the drivers collector is the most ideal location for a wideband, can I relocate the narrowband to the location of the disabled secondary sensor and put the wideband in its place?
Thanks!
Moving your narrow band back that far will cause issues with it. You can either put your wide band in the rear o2 bung and deal with it not reading correctly at idle (will read correct WOT) or get another bung installed closer to the header or in the header.
Thread Starter
On The Tree
Joined: May 2014
Posts: 179
Likes: 0
From: FortLauderdale/Orlando
Lived/went to school in Brenham for 2 years. Blue Bell ftw.
