FormulaTurtle

So noticed there was a hole in a tube, I taped it up but now the hose with a little metal valve is clicking, and doesn't sound very normal.

I circled it on the photo.

Any help would be much appreciated for i can buy a replacement.





What is the hose with the metal valve in it called.

red_00z28

iTrader: (14)

PCV hose, clicking is good, means it's not full of crud.

2xLS1

iTrader: (25)

Wow. A 2" piece of 3/8 rubber fuel line between the valve and manifold would have been a better way to fix that. Since that hose usually rots, you may have collapsed the hose opening or restricted the flow through that hose underneath all that tape.

FormulaTurtle

Thanks for the reply,
I would have just put a different hose on but there is a weird metal plug/valve thing inside the hose, I had to cut some of the hose as it was rotted.


I found it on ebay, the part i circled on the new part is what broke on mine, too bad they did not sell just that piece but looks like i have to buy the whole assembly, Thank you guys for the help! =)