PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

12V Source while cranking and key on 02 Camaro

Thread Tools
 
Search this Thread
 
Old 05-25-2015, 09:06 PM
  #1  
TECH Veteran
Thread Starter
iTrader: (14)
 
redbird555's Avatar
 
Join Date: Mar 2009
Location: Pompano Beach FL
Posts: 4,444
Likes: 0
Received 8 Likes on 8 Posts

Default 12V Source while cranking and key on 02 Camaro

Hey guys so I have the lingenfelter box controlling my ls3 swap and the box needs a 12v signal that's off when the key is off but hot while cranking and then when on. I've been checking the fuse block but havent found much, i'll be using the battery to power it just need a source to trigger the relay.
Old 05-27-2015, 11:42 AM
  #2  
TECH Fanatic
iTrader: (17)
 
ghettocruiser's Avatar
 
Join Date: Mar 2006
Location: West Chester, PA
Posts: 1,746
Likes: 0
Received 2 Likes on 2 Posts

Default

Im not 100% sure...but your fuse blocks under the hood should contain a big relay labeled "IGN". Im pretty sure there is a larger gauge pink wire going to that, that comes from the bulkhead connector, and it should be hot while ignition on and while cranking.

If Im WAY off base on this, you should have a bigger gauge wire going to your fuse boxes that is hot while cranking...as it has to keep the sensors/coils/injectors powered.

J.



Quick Reply: 12V Source while cranking and key on 02 Camaro



All times are GMT -5. The time now is 06:10 PM.