Engine and Transmission Control Help
06-01-2015, 10:57 PM
#1
Teching In
Thread Starter
Join Date: May 2015
Location: Southern Indiana
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Engine and Transmission Control Help i think this is the right place for this.
Im building a 5.3/LS1 hybrid motor and i PLANNED on buying (havent yet) the Holley HP EFI system to run it because its going in my 1993 C1500 pickup. it currently has a TBI 350 and 4L60e. Now from what ive read, the HP system doesnt have provisions for running the transmission. But is there any way to maybe keep the trucks current PCM and use that to control the transmission with a little tweeking of the engine harness? any help is appreciated
Im building a 5.3/LS1 hybrid motor and i PLANNED on buying (havent yet) the Holley HP EFI system to run it because its going in my 1993 C1500 pickup. it currently has a TBI 350 and 4L60e. Now from what ive read, the HP system doesnt have provisions for running the transmission. But is there any way to maybe keep the trucks current PCM and use that to control the transmission with a little tweeking of the engine harness? any help is appreciated
