Pulling multiple codes on my WS6..

Reply Subscribe

Thread Tools

Search this Thread

Jul 4, 2015 | 02:15 PM

Destrano1

Thread Starter

Teching In

Joined: Jan 2015

Posts: 46

Likes: 1

From: Kirtland AFB, NM

Pulling multiple codes on my WS6..

Hey all, so I have had a service engine light on for a while now and I pulled the codes for it, I'm curious what I have to do to get the codes off??

P0410
P0412
P0418

Any ideas?? The light is getting obnoxious.

Jul 4, 2015 | 03:24 PM

Mike TA

Launching!

iTrader: (6)

Joined: Nov 2014

Posts: 271

Likes: 0

From: Spring TX

Working on clearing similar codes. I'll let you know what I find out....if anything. Lol.

Jul 5, 2015 | 06:39 AM

Old Geezer

TECH Senior Member

iTrader: (3)

Joined: Jun 2004

Posts: 5,639

Likes: 71

From: GA, USA

Looks like the AIR system is inop, damaged, etc.
Might you have it unhooked, removed, etc?
If you clear the codes, they'll just reset, unless you turn them off.
Do you have EFILIVE, or HPT??

Jul 5, 2015 | 10:22 AM

Destrano1

Thread Starter

Teching In

Joined: Jan 2015

Posts: 46

Likes: 1

From: Kirtland AFB, NM

Quote:

Originally Posted by Old Geezer

Looks like the AIR system is inop, damaged, etc.
Might you have it unhooked, removed, etc?
If you clear the codes, they'll just reset, unless you turn them off.
Do you have EFILIVE, or HPT??

When I got the SLP lid the tube going to the lid was disconnected but one way or another that should still be pulling air.

Would that cause it?
That's literally the only thing I've done to that.

And nope, don't even know what those are :c

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last