98 maro, no start!
Thread Starter
TECH Apprentice
Joined: Oct 2014
Posts: 307
Likes: 0
From: Iowa
98 maro, no start! Car died, wouldnt fire. got towed home, hooked scanner up. got a camshaft position sensor code. (high voltage)
replaced cam sensor, put everything back together, it fires up for a second then dies.
unplugged maf, started up and ran higher idle for about 30 seconds, then died
we were thinking bad gas, but any other ideas? ran fine for months after cam swap just fine.
98 ls1
has small gm hotcam, lid, headers
thanks
replaced cam sensor, put everything back together, it fires up for a second then dies.
unplugged maf, started up and ran higher idle for about 30 seconds, then died
we were thinking bad gas, but any other ideas? ran fine for months after cam swap just fine.
98 ls1
has small gm hotcam, lid, headers
thanks
TECH Senior Member
Joined: Apr 2002
Posts: 6,080
Likes: 17
From: So.Cal.
