PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

NO Start

Thread Tools
 
Search this Thread
 
Old 06-18-2016, 10:30 PM
  #1  
Teching In
Thread Starter
 
anthonyl79's Avatar
 
Join Date: Feb 2015
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default NO Start

So I have 05 GMC Envoy that I did a LS sawp in. Used a LM4 from a 04 trailblazer, a 2003 Silverado harness and ECM. Changed the cam sensor to the front timing cover. ECM has not been tuned or VATS deleted. Should run for several seconds from what I hear.

Have fuel pressure, spark but no injector pulse. I do have voltage to the injectors, but measure voltage on both sides of the injector harness with injector unplugged. The tach doesnt move either. Cant get a connection to the datalink connector. Had the same issue with factory setup on the Envoy. Have three grounds total on the engine.

Thanks in advance!!



Quick Reply: NO Start



All times are GMT -5. The time now is 07:37 PM.