PCM Question
Thread Starter
Teching In
Joined: Aug 2013
Posts: 47
Likes: 0
From: Aurora, CO
PCM Question I have collected my parts, now it is time to get to work.
Question 1. I have found a 0411 PCM out of a truck. Going to send to Frost for reflash to a 2002 Camaro. Just need to know if any wiring changes will be required, or will the harness I make work fine?
Will be taking a 98 t56 harness and turning it into an 02 Camaro with a 4L80 segment.
Question 1. I have found a 0411 PCM out of a truck. Going to send to Frost for reflash to a 2002 Camaro. Just need to know if any wiring changes will be required, or will the harness I make work fine?
Will be taking a 98 t56 harness and turning it into an 02 Camaro with a 4L80 segment.
TECH Addict
Joined: Aug 2005
Posts: 2,305
Likes: 126
From: Monroe,NY
If you program the pcm for a camaro os you need the the wiring harness to match. You can use the truck harness but you would have to swap wires around to match the pcm. You can go here http://lt1swap.com/99-02_vortec_pcm.htm to see the different pinouts.
