Any tuners in north ga?
Thread Starter
Joined: Jan 2012
Posts: 7,848
Likes: 5,198
From: Dawsonville Ga.
Any tuners in north ga? Guys, I am running into walls with my tuning. Damon at Mast sent me a startup tune, which runs the car, but my idle and low speed stuff is way off. Basically Mast doesn’t have time to remote tune me. I’m running Mast electronics, which is simple enough to operate, But most shops won’t touch it. I need a good tuner.
Anybody semi local to me out there want to lend a hand, and make some cash?
Not looking to put on a dyno right now to work on the idle and off throttle stuff, but I will if we can coordinate that.
I’ve used Vengeance on several builds with GM electronics, but I can’t even get mike to call me back on this deal. I don’t want to remove the Mast stuff, and go GM electronics, but I will if I have to. This is a high end build, and I would love to drive it. Pm me if your experienced and serious.
Anybody semi local to me out there want to lend a hand, and make some cash?
Not looking to put on a dyno right now to work on the idle and off throttle stuff, but I will if we can coordinate that.
I’ve used Vengeance on several builds with GM electronics, but I can’t even get mike to call me back on this deal. I don’t want to remove the Mast stuff, and go GM electronics, but I will if I have to. This is a high end build, and I would love to drive it. Pm me if your experienced and serious.
Thread Starter
Joined: Jan 2012
Posts: 7,848
Likes: 5,198
From: Dawsonville Ga.
I will talk to my neighbor. He has done a lot with Holley and Haltech systems, but he might be interested in something different. Some of the old fueling tables from his '70 Vette with a 434 might be useful. He also has an MD250 dyno in his garage, so that might help. I'll just need to find out if he is interested.
Thread Starter
Joined: Jan 2012
Posts: 7,848
Likes: 5,198
From: Dawsonville Ga.
I will talk to my neighbor. He has done a lot with Holley and Haltech systems, but he might be interested in something different. Some of the old fueling tables from his '70 Vette with a 434 might be useful. He also has an MD250 dyno in his garage, so that might help. I'll just need to find out if he is interested.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo I just talked to my neighbor. He said he would be very interested in working with the Mast software for the first time. Like I said before, he has mostly dealt with Holley's various software and a few versions of Haltech. Usually I dealt with any HPT that we messed with, and one of our other friends would do Ford related Sniper tuning, along with occasional AEM stuff. Just to be upfront, this was all non-commercial tuning. It just centered around his house because he is the only person most of us know with a dyno in his home garage. If you are interested, PM me for details.
Thread Starter
Joined: Jan 2012
Posts: 7,848
Likes: 5,198
From: Dawsonville Ga.
I just talked to my neighbor. He said he would be very interested in working with the Mast software for the first time. Like I said before, he has mostly dealt with Holley's various software and a few versions of Haltech. Usually I dealt with any HPT that we messed with, and one of our other friends would do Ford related Sniper tuning, along with occasional AEM stuff. Just to be upfront, this was all non-commercial tuning. It just centered around his house because he is the only person most of us know with a dyno in his home garage. If you are interested, PM me for details.