Question about 3 Bar Map sensor for ls6 intake looking To see if there is a 3 bar Map sensor that will directly bolt on to the ls6 intake. Ive seen a couple threads were people are taping the intake with a fitting and running a piece of hose I’m just not trying to go that route unless I completely have to, I’d rather have plug and play. any input would be helpful I’ve done a few searches but everything i see is from old threads. |
I found this one and was just getting ready to post here to see if anyone has used it and if it's any good. DSteck isn't making his 2.5 map sensors anymore and I need a sensor. https://www.efisource.com/wp/shop/ls...ar-map-sensor/ |
Originally Posted by turboffr
(Post 19852313)
I found this one and was just getting ready to post here to see if anyone has used it and if it's any good. DSteck isn't making his 2.5 map sensors anymore and I need a sensor. https://www.efisource.com/wp/shop/ls...ar-map-sensor/ |
I’ve seen a lot of threads about that sensor with people have mixed feelings about it but I’m just going to bite the bullet it’s only $34 |
i know several people in my town using the efi source sensor with no issues |
ZR1 sensor and drill the hole out to 1/2" |
I recently converted to a 3 bar OS. ACDelco 3bar MAP Sensor part number 12615136 is the one I use. Works great and personally would not use anything other than ACDelco for sensors. Had to use a file on the map sensor to fit. Doesn’t effect anything. The good thing about that is you don’t have to mess with your intake. And if you use HP tuners it will update all settings properly for this map sensor. |
3 bar map I have the efi source 3 bar map sensor for the ls6 intake its new. I decided I was going to switch to the other style u dont like I'll charge u 35 shipped to your door shoot me a pm |
Originally Posted by stillspinnin
(Post 19854064)
I have the efi source 3 bar map sensor for the ls6 intake its new. I decided I was going to switch to the other style u dont like I'll charge u 35 shipped to your door shoot me a pm |
Originally Posted by 02z28marom6
(Post 19852875)
I recently converted to a 3 bar OS. ACDelco 3bar MAP Sensor part number 12615136 is the one I use. Works great and personally would not use anything other than ACDelco for sensors. Had to use a file on the map sensor to fit. Doesn’t effect anything. The good thing about that is you don’t have to mess with your intake. And if you use HP tuners it will update all settings properly for this map sensor. |
Originally Posted by 02z28marom6 I recently converted to a 3 bar OS. ACDelco 3bar MAP Sensor part number 12615136 is the one I use. Works great and personally would not use anything other than ACDelco for sensors. Had to use a file on the map sensor to fit. Doesn’t effect anything. The good thing about that is you don’t have to mess with your intake. And if you use HP tuners it will update all settings properly for this map sensor. |
Originally Posted by turboffr
(Post 19854494)
Isn't that a 2 bar sensor? |
Originally Posted by Mavn That's the one I run |
Yes they do |
All times are GMT -5. The time now is 05:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands