toplessHO

iTrader: (25)

I want to build a bench harness with VATS .
already have a BCM harness made as well as SDM.
most of the systems I'm working with are early 2000s with passkey.
looking for ideas making the passlock sensor or if I have to will rob one from vehicle with proper key.

I will be using several different PCMs mostly 99+
so removing VATS in the program isn't really an option.
I realize BCM will need to do a relearn.

toplessHO

iTrader: (25)

heres a pic of connection to BCM

toplessHO

iTrader: (25)

surely someones used a BCM and resistor to clear the VATS so the system can stay intact and still be bench tested. Or open to any other solutions

toplessHO

iTrader: (25)

success with the bench test
06 PCM 03 BCM wired in 15K resistor to replicate Passlock2 system.