Cam Tune
Thread Starter
Teching In
Joined: Jan 2015
Posts: 43
Likes: 0
From: Fort Bliss
Cam Tune Im pretty new to hptuners and im trying to get my car going i have a tune currently on it for a baseliine but when driving and going WOT it just turns off completely im pretty sure its something in my tune Im still trying to get it where it needs to be and was just wondering if someone could take a look at my current tune and give me some advice on what i should change any help is appreciated thanks
current mods
6.0 lq4 bored .030 with flat top pistons
torquer V4 cam,
Ls6 Intake,
! 7/8 headers,
241 heads,
4l80e trans.
stock converter
current mods
6.0 lq4 bored .030 with flat top pistons
torquer V4 cam,
Ls6 Intake,
! 7/8 headers,
241 heads,
4l80e trans.
stock converter
10 Second Club
Joined: Nov 2005
Posts: 933
Likes: 75
Don't go WOT on a baseline tune. Are you logging with a wideband? Post a log. Also look and see if you have ant trouble codes. And what does "turns off completely" mean?
Last edited by dw456post; Aug 25, 2018 at 08:18 AM.
Thread Starter
Teching In
Joined: Jan 2015
Posts: 43
Likes: 0
From: Fort Bliss
gotcha no more WOT pulls luckily i only did one and i dont currently have a wideband i have a 2 codes p106 and the tranny code p0740 i think that oones there because i need to do a segment swap for the 4l80e im post a log of it in park and by tur off it just shut off as if i turned the key off started right back up and drove it back with no more WOT pulls
Well if its doing that, either you have not enough fuel or you have a ignition issue. I would start by fixing the segment swap, before you cause yourself transmission issues. Once you do that, why do you have a p106 code? If your map is not reading right, your just killing yourself trying to tune. You need to get it mechanically sound before worrying about the tune, and if your doing WOT, at this point, you really want to damage that engine. To properly tune WOT, you really need a wideband, but lets crawl before we walk. Get your codes fixed and report back.
Thread Starter
Teching In
Joined: Jan 2015
Posts: 43
Likes: 0
From: Fort Bliss
alright guys the codes are gone and the segment swap has been completed it will drive now i just got the time to do a log on it i didn't even attempt to go half throttle im going to post the log and the current tune. What should i be looking for and also what adjustments should i be making?
