Tuner studio virtual gauges?
Thread Starter
Joined: Jun 2005
Posts: 4,641
Likes: 392
From: cookeville, TN
Tuner studio virtual gauges? Kind of stumbled onto this while looking into doing a digital dash display, anybody know if the ms software works with ecms other than the mega/microsquirt?
If I could run there software and build my guages that way it would be way easy compared to starting from scratch.
If I could run there software and build my guages that way it would be way easy compared to starting from scratch.
Will not work with other systems as its a different protocol (language) from what i have discovered. In the long run, it would be more cost effective to run e MS system and a touch laptop or a Raspberry Pi with a touch screen.
Thread Starter
Joined: Jun 2005
Posts: 4,641
Likes: 392
From: cookeville, TN
So that was kind of my thought and ive seen it done on PI, but they were using a megasquirt controller to do it and that software. Got any more info on e MS? or did you mean a MS system like windows.
what im wanting to do is have a large tach in the center and a lcd on either side of it with additional gauges like a digital speedo odometer on one and the basic 4 on the other screen.
what im wanting to do is have a large tach in the center and a lcd on either side of it with additional gauges like a digital speedo odometer on one and the basic 4 on the other screen.
