HPTuners can it read VSS and command
Thread Starter
Launching!
Joined: Sep 2016
Posts: 254
Likes: 0
Well ..... dont have VSS ....... but looks like when I command the trans to shift via HPT it
shifts ---- at least 1-3 .... and I think 4 as well but harder to tell without load ��
Now to track down if its a wiring issue ...... or a sensor issue /other.
Should these snesors OHM out to any specifc range ?
How about backprobing the sensor for voltage
shifts ---- at least 1-3 .... and I think 4 as well but harder to tell without load ��
Now to track down if its a wiring issue ...... or a sensor issue /other.
Should these snesors OHM out to any specifc range ?
How about backprobing the sensor for voltage
