Dead throttle
1. Throttle / pedal position sensor / switch "D" circuit low input
2. Throttle / pedal position sensor / switch "E" circuit low input
3. Throttle / pedal position sensor / switch D" /"E" voltage correlation.
Ive now changed the plug connecting the TPS to the loom and have cleared the fault codes. I'm hoping this will sort it but if not does anyone know what the voltages should be and where its best to measure them. I'm assuming at the new plug
TIA Steve
This is the controller kit I have
Cheers
Steve
[img]webkit-fake-url://7bbee1f8-e259-44d5-b944-1c5860f89066/imagejpeg[/img]





