anyone else seeing this behavior?
setup is term x, 6.86 pro dash, all the latest firmware and software, gps is hooked up and works.
logging using the pro dash, usb stick plugged into the dash logging directly to it.

it seems to have a couple data points in the log with -900M seconds timestamp.




its not preventing me from using the logs, its just a little annoying and weird.

 

i had same issue after update to V2.. there is a firmware 5.0.84 for the dash that fixes this.. another guy I worked with had same issue and holley gave him the firmware.
I loaded but didn't get to datalog at track before year end but worked for him... this was back in October so not sure why they haven't posted latest to the web yet.

 

082 is the latest on the holley site.
the way they post their updates make it really hard to understand which is the latest and correct download.

 

Correct. They have a.84 that is not on the site.. I have had it since October and it addresses this datalog issue. You might call tech support and twist their arm.. the file is 35mb so a little big for me to email...

 

thanks for the info, ill see if i can figure out how to get my hands on it

 

holley tech support wouldnt share the file, they want me to send the dash in.
seems kind of a silly solution so im trying another route.
i also did a google search and couldnt find any other mention of those firmware numbers online so hopefully this thread will be helpful for others until holley decides to release the fix.

 

PM sent