Holley Dominator Speedo
Thread Starter
Joined: Oct 2016
Posts: 1,584
Likes: 374
From: Armstrong BC
Holley Dominator Speedo Hey guys trying to calibrate an autometer Speedo with my Dominator. I've got everything setup in the software and pin mapped to my Speedo. I've currently got it set at 4000 ppm.
When I go into calibration mode on the Speedo itself after I've driven 2 miles can I just input the pulse number given by the autometer speedo into the software??
Example right now in the software pulses are set at 4000, I calibrate the autometer and it spits out say 15,558 pulses. Can I just input that number into the software and should be good??
When I go into calibration mode on the Speedo itself after I've driven 2 miles can I just input the pulse number given by the autometer speedo into the software??
Example right now in the software pulses are set at 4000, I calibrate the autometer and it spits out say 15,558 pulses. Can I just input that number into the software and should be good??
