Does anyone have good injector data for factory LSA injectors to put into a Holley Terminator X? Went to set up our base file and Holley doesn't list them in their stored injector data.

 

If they have data for the LS9 injectors they are the same injectors as the LSA.

 

Unfortunately, they don't which surprises me because its a pretty common injector

 

I would be shocked if @Project GatTagO doesn't have that injector data for the Holley.

 

This link to a HP Tuners thread has the ZR1 injector data:
https://forum.hptuners.com/showthrea...-Values-Inside

Perhaps you can adapt that to Holley.

I found a 2019 thread on the Holley site asking for LS9 injector data and there was no good replies.

 

awesome! much appreciated guys!

 

I actually don't have that data. When working with Holley EFI, the injector dead times are important but if they off a little it isn't the end of the world. In the past, I've used LS3 dead times and adjusted the flow numbers to LSA numbers, and that's worked well.

Andrew