|
will this help me pass inspection? my car is throwing code p0410. ive changed the checkvalve and the air pipe to that side and still get the code...if i take it to the dealership to get it fixed im looking at a couple hundred bucks...instead of that if i get autotap and EFI live and delete the code will i pass inspection that way?.Thanks in advance |
Originally Posted by sirhavoc my car is throwing code p0410. ive changed the checkvalve and the air pipe to that side and still get the code...if i take it to the dealership to get it fixed im looking at a couple hundred bucks...instead of that if i get autotap and EFI live and delete the code will i pass inspection that way?.Thanks in advance No you will not pass due to the fact that you reset all of your readiness test status bits when you delete a code or re-flash your VCM. It is implemented this way to keep people from having a car with defective emmission equipment and going by autozone and deleting their codes on the way to the testing station. Here is a post that I wrote that may explain what readiness test are. https://ls1tech.com/forums/showpost....19&postcount=6 And here is a post about the GM Drive cycle. https://ls1tech.com/forums/showpost....7&postcount=10 |
| All times are GMT -5. The time now is 03:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands