VE Tablel Correlations - to LTFT Correction
VE Tablel Correlations - to LTFT Correction Ok so I have made the pivot tables and put my LTFT in on a table with RPM and MAP... how much to I adjust.
For example.. at 800 RPM and 35 on the MAP scale.. my PCM is correcting 5.5% average B1 and B2.... so how much do I scale the VE table? 5.5%?
These are not really numbers.. just to convey what I am asking.
I have been searching around and reading for more than 2 hours.. lots of good information here.. just cannot find a correlation.
AND .. where is a list of which LTFT cells are for what? I found that yesterday and cannot find it again to save me.
TIA
For example.. at 800 RPM and 35 on the MAP scale.. my PCM is correcting 5.5% average B1 and B2.... so how much do I scale the VE table? 5.5%?
These are not really numbers.. just to convey what I am asking.
I have been searching around and reading for more than 2 hours.. lots of good information here.. just cannot find a correlation.
AND .. where is a list of which LTFT cells are for what? I found that yesterday and cannot find it again to save me.
TIA
