new pacesetters=8 codes thrown???
Thread Starter
Staging Lane
Joined: May 2004
Posts: 78
Likes: 0
new pacesetters=8 codes thrown??? Background:
my friend just got on his new pacesetters for his 98 z28, he ran it for a day open . and of course the SES light came one, we assumed because of the o2 sensors from the cats were disconnected. so the next day he gets a y pipe with some magna flow high flow cats, and he puts the sensors back in.
while testing driving we notice that in certain RPMs the car seems to give out for slight second, and a loud pop sometimes right before a down shift at WOT or after. It feels like a miss fire, he said that when he put his spark plugs back in he set them to .06 gap (he said stock) becaue they were set wrong at (.08).
problem:
anyway, we get the thing scanned and the codes, i dont have with me, but i remember what they said:
low voltage 02 sensor on all four of them
bank 1 and 2 running lean
and the last two were the same as the first two (duplicate code)
no misfire read in
we reset pcm, everything seems fine, no codes being thrown, we get down the road, and not only is his SES on, its blinking, (which means misfire) (it never did that before) we didnt have time to go get it scanned again, but what are ur thoughts??
the low voltage on the sensors can wait, but having ur car misfire and run lean is not good.
please help
thanks
my friend just got on his new pacesetters for his 98 z28, he ran it for a day open . and of course the SES light came one, we assumed because of the o2 sensors from the cats were disconnected. so the next day he gets a y pipe with some magna flow high flow cats, and he puts the sensors back in.
while testing driving we notice that in certain RPMs the car seems to give out for slight second, and a loud pop sometimes right before a down shift at WOT or after. It feels like a miss fire, he said that when he put his spark plugs back in he set them to .06 gap (he said stock) becaue they were set wrong at (.08).
problem:
anyway, we get the thing scanned and the codes, i dont have with me, but i remember what they said:
low voltage 02 sensor on all four of them
bank 1 and 2 running lean
and the last two were the same as the first two (duplicate code)
no misfire read in
we reset pcm, everything seems fine, no codes being thrown, we get down the road, and not only is his SES on, its blinking, (which means misfire) (it never did that before) we didnt have time to go get it scanned again, but what are ur thoughts??
the low voltage on the sensors can wait, but having ur car misfire and run lean is not good.
please help
thanks
