PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

wanted to verify

Thread Tools
 
Search this Thread
 
Old 01-13-2005 | 09:47 PM
  #1  
redbandit98's Avatar
Thread Starter
TECH Fanatic
iTrader: (13)
 
Joined: Feb 2004
Posts: 1,164
Likes: 1
From: Ft.Smith AR
Default wanted to verify

hey guys im putting in a nx maf kit for my buddy..it came with the elctronic wot switch..i was just going to verify that the correct tps wire was pin 24 on the red connector.. its a dark blue wire?i have a 98 car so mine is different and i found that doing some research.. his car is a '00..Ii will of course check it when i start on it but i just wanted to get a head start..thanks matt
Old 01-13-2005 | 11:16 PM
  #2  
SSmokin 01's Avatar
9 Second Club
iTrader: (14)
 
Joined: Nov 2002
Posts: 591
Likes: 2
From: Long Island
Default

http://www.ls2.com/boggs/torques/98pinpcm.htm

Circuit Number C2 (Blue)

12 DK BLU TP Sensor Signal
Old 01-13-2005 | 11:35 PM
  #3  
redbandit98's Avatar
Thread Starter
TECH Fanatic
iTrader: (13)
 
Joined: Feb 2004
Posts: 1,164
Likes: 1
From: Ft.Smith AR
Default

that is for my car...not his (2000) that website is where i got my info at..i will persume it is right until i can verify with my meter...
thanks matt
Old 01-14-2005 | 12:08 AM
  #4  
SSmokin 01's Avatar
9 Second Club
iTrader: (14)
 
Joined: Nov 2002
Posts: 591
Likes: 2
From: Long Island
Default

Originally Posted by redbandit98
that is for my car...not his (2000) that website is where i got my info at..i will persume it is right until i can verify with my meter...
thanks matt

missed that it was for your buddies car. I think I need to get some sleep.




All times are GMT -5. The time now is 01:11 AM.