Tuning timing
Thread Starter
Launching!
Joined: Apr 2003
Posts: 209
Likes: 0
From: Fulshear, TX
Tuning timing i'm using hpt when tuning for wot timing should i just add timing to the rows where g/cl compares to wot on my logs or should i be adding to the entire table. thanks in advance
Yes it would be the lower rows in the timing table, if your target is the wot area.
Also the higher rpms. No need to bump timing in the 800 rpm range. Not that you would ever be pulling those airflows at 800 rpms though...
Also the higher rpms. No need to bump timing in the 800 rpm range. Not that you would ever be pulling those airflows at 800 rpms though...
