where is your temp gauge needle at?
where is your temp gauge needle at? since i bought my 2000 Z28 used about 3 months ago the temp was at almost the half of the gauge? 
i mean the needle at almost the third tik at 210F is that normal? or it should be lower? does that mean the thermostat is sticking? or there is something else?
i mean the needle at almost the third tik at 210F is that normal? or it should be lower? does that mean the thermostat is sticking? or there is something else? 
blacker, where the temp gauge in the 98 models is pointing to? i tried with LS1edit to lower the temp by letting the 2 fans work at 180-170F instead of i guess 235-225F but that didn't work the gauge is still pointing almost straight up.
all 99+ gauges will register 210 in the whole operating range, from around 180-225 degrees (approx, don't have the correct numbers infront of me right now)
my 98 actually works decent. (although, they are padded a little on the top as well)
Ryan
my 98 actually works decent. (although, they are padded a little on the top as well)
Ryan
