EOP Switch?
Thread Starter
12 Second Club
Joined: Sep 2002
Posts: 547
Likes: 0
From: Minnesota
EOP Switch? Hey guys while doing an intake swap on my dads WS6 we some how hit the EOP Switch (Engine Oil Pressure switch) and broke it. The wires are fine, we just broke the plastic housing off 
How do you replace this piece? I have a pic to so you can see what I am talking about.
Dan
How do you replace this piece? I have a pic to so you can see what I am talking about.Dan
TECH Senior Member
Joined: Nov 2001
Posts: 7,036
Likes: 1
From: Lake Zurich, IL
It's a big wrench ... you'll notice at the bottom it has what looks to be a large nut ... i'm thinking 22mm ...
just loosen it up, put new on in (I'm not sure of torque specs off hand... anyone know?) and you're set... I did the same thing the first time I did my LS6 intake manifold... didn't know it was back there... and the brake vacuum line grabbed it and snapped it
When I did mine I had the lifter valley cover off too... made it easier to get a grip on it
just loosen it up, put new on in (I'm not sure of torque specs off hand... anyone know?) and you're set... I did the same thing the first time I did my LS6 intake manifold... didn't know it was back there... and the brake vacuum line grabbed it and snapped it
When I did mine I had the lifter valley cover off too... made it easier to get a grip on it
Thanks again. Thread Starter
12 Second Club
Joined: Sep 2002
Posts: 547
Likes: 0
From: Minnesota
Originally Posted by horist
It's a big wrench ... you'll notice at the bottom it has what looks to be a large nut ... i'm thinking 22mm ...
just loosen it up, put new on in (I'm not sure of torque specs off hand... anyone know?) and you're set... I did the same thing the first time I did my LS6 intake manifold... didn't know it was back there... and the brake vacuum line grabbed it and snapped it
When I did mine I had the lifter valley cover off too... made it easier to get a grip on it
just loosen it up, put new on in (I'm not sure of torque specs off hand... anyone know?) and you're set... I did the same thing the first time I did my LS6 intake manifold... didn't know it was back there... and the brake vacuum line grabbed it and snapped it
When I did mine I had the lifter valley cover off too... made it easier to get a grip on it
You don't happen to have a part number off hand?
Dan
TECH Senior Member
Joined: Nov 2001
Posts: 7,036
Likes: 1
From: Lake Zurich, IL
Originally Posted by ONGRNGO
You don't happen to have a part number off hand?
Dan
Dan
see attachments part 103
http://www.sdpc2000.com/search.asp?s...2267&doquery=1
