Tuning help
Thread Starter
TECH Enthusiast
Joined: Mar 2004
Posts: 697
Likes: 0
Tuning help Hey guys, I need some help here to get me started and save me some time in the long run. I am gonna begin tuning my car tomorrow since I put the new heads and cam in and I need some advice for getting the idle smoothed out and such. I know I'm not giving you much to work with here, but I just need some basic, general advice on which tables to attack first. I put some stock 6.0L heads on and the cam specs are 222/218 114. Any and all help is GREATLY appreciated.
PS - this is just a baseline tune before the turbo goes on in a week or so, so it doesnt have to be perfect. I just want to get all the kinks out.
PS - this is just a baseline tune before the turbo goes on in a week or so, so it doesnt have to be perfect. I just want to get all the kinks out.
TECH Addict
iTrader: (6)
Joined: Dec 2001
Posts: 2,028
Likes: 0
From: sojourning....looking for my city whose builder and maker is God.
Originally Posted by Eight Ball WS6
anyone?
2. Idle Air in Gear: 60C and up to 8.6
3. under Fuel ( or airflow for HPtuners) Main VE Table: Multiply column 400 rpm by 60%. Multiply column 800 by 80%. Multiply column 1200 by 90%.
4. Ignition High Octane Table: Add 2 deg to all points 400 to 1000 RPM, .08 to .32 g/sec
You may also want to raise you idle RPMs if needed.
Last edited by Lady Redhawk; Feb 25, 2005 at 11:21 AM.
TECH Addict
iTrader: (6)
Joined: Dec 2001
Posts: 2,028
Likes: 0
From: sojourning....looking for my city whose builder and maker is God.
Originally Posted by EightBallWS6
wow, thank you lady redhawk, that's EXACTLY what I was looking for! 
