Tmoney

well my plug wires got torn out when i pulled it out of the obeII pot and then i got the wires soildered back to the plug but now the it dosent work it keeps saying the ignitions not on but it is well during the time i pulled the wires out i took off the egr soilnoid so i dont think it had anything to do with it but maybe soo any elese had this problem

67Firebird455

iTrader: (27)

I just posted about the same thing, pulled the 3 leads out of the connector, green, grey and white. Did you ever get it to work, if so, which wires did you solder where?

Tmoney

No but I looked at my friends wires and got it soildered back together but still dont work get the ignitions off code help anyone

2001NBMZ28

You might have blown the "CIG ACCY" fuse when the wires came loose - same fuse powers the DLC.

Edit: Just re-read your post. If the Predator is powering up it's not the CIG ACCY fuse - I'd check the others though.

Tmoney

Well it powers up and dose everything its sposse to do till i try to tune or run codes then it wont do it dosent get a signal from the ignition

2001NBMZ28

You may need to give diablosport a call, or post in the product support section at www.diablosporttuning.com/forums/