Need help with SES
Thread Starter
TECH Fanatic
iTrader: (10)
Joined: Mar 2003
Posts: 1,106
Likes: 2
From: St Simons Isl, GA
Need help with SES OK, I know you guys can't help me out a lot until I get the code read, but here's my problem. I have mods listed in sig, with O2 extensions on the fronts and O2 sims on the rears. The headers were installed and tuned in December, and I've had absolutely no problems since. This morning on my way to work, I go outside to start the car. It fires up fine, idles fine, but the SES light kicks on after it idles for about 15 seconds. I go ahead and drive to work, it runs great and just the same as before the light came on.
Anyone have any experiences similar to this? I'm going to get the code pulled after work, so I'll have more info then, but I wanted to go ahead and see if anyone had any help they could give me beforehand. Think its a random misfire? Thanks
BTW, does anyone know for sure if Advance Auto can pull codes?
Anyone have any experiences similar to this? I'm going to get the code pulled after work, so I'll have more info then, but I wanted to go ahead and see if anyone had any help they could give me beforehand. Think its a random misfire? Thanks
BTW, does anyone know for sure if Advance Auto can pull codes?
Thread Starter
TECH Fanatic
iTrader: (10)
Joined: Mar 2003
Posts: 1,106
Likes: 2
From: St Simons Isl, GA
OK, I broke down and bought my own code scanner. Its the P0135 code. I tried to search and read up a little, but I didn't get far. What do I need to do to fix it? Replace the sensor? Maybe a fuse?
