LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
PCM Diagnostics & Tuning
PE table noob question

PCM Diagnostics & Tuning HP Tuners | Holley | Diablo

PE table noob question

Reply Subscribe

Search this Thread

Old

Apr 4, 2005 | 08:49 PM

#1

Thread Starter

Teching In

Joined: Jan 2005

Posts: 23

Likes: 0

Default

PE table noob question

When does the PCM use the PE table? After a certain % of throttle, or only at WOT? Any help would be appreciated. Thanks

Old

Apr 5, 2005 | 08:11 AM

#2

On The Tree

iTrader: (1)

Joined: Dec 2004

Posts: 105

Likes: 8

From: Huntingtown, MD

Default

You go into PE after a certain % of throttle. The % required changes based on RPM.

Old

Apr 5, 2005 | 07:59 PM

#3

Thread Starter

Teching In

Joined: Jan 2005

Posts: 23

Likes: 0

Default

Quote:

Originally Posted by pknowles

You go into PE after a certain % of throttle. The % required changes based on RPM.

that is good info. do you know what % for each rpm, or is it an equation?

Old

Apr 6, 2005 | 06:36 AM

#4

On The Tree

iTrader: (1)

Joined: Dec 2004

Posts: 105

Likes: 8

From: Huntingtown, MD

Default

On my car (2002 Camaro SS) the stock file enabled PE mode at 64% TP from 0-3400 rpm, 60% TP from 3400-3800, 54% TP from 3800-4200, and 34% TP from 4200-up. Anything above those values puts you in PE mode. Not sure if GM changed this year to year, but that's what my file says.

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 05:10 AM.