HP tuner Extract table info to excell to compare???
HP tuner Extract table info to excell to compare??? So I'm new to all of this and have downloaded two bin files from 2002 Z06s,
1 is stock and 1 has the mods my car does TRAP, LG headers and Stinger exaust. I would like to compare different tables to see what was changed to try to kind of learn... I still think I'm going to have to start from scratch since I have a different cam then the 02's but at least it would give me a starting point.
Any suggestions? I figured out the gags doing this but comparing tables by opening and closing would take awhile!
Bobby
1 is stock and 1 has the mods my car does TRAP, LG headers and Stinger exaust. I would like to compare different tables to see what was changed to try to kind of learn... I still think I'm going to have to start from scratch since I have a different cam then the 02's but at least it would give me a starting point.
Any suggestions? I figured out the gags doing this but comparing tables by opening and closing would take awhile!
Bobby
TECH Veteran
Joined: Dec 2004
Posts: 4,012
Likes: 1
From: Beaumont, TX
Magnus/Keith of HPTuners says you should be able to copy and paste directly from the tables into Excel: https://ls1tech.com/forums/showpost....3&postcount=32
Last edited by ACW; Apr 25, 2005 at 10:36 PM.
TECH Veteran
Joined: Dec 2004
Posts: 4,012
Likes: 1
From: Beaumont, TX
Originally Posted by 93TAWicked1
I see it now thanks I'm just a newbie dumbass, hopefully I won't hurt my car with this thing 
Good luck, keep reading in this forum, start off with the simpler stuff, and hopefully you won't have any problems. Last edited by ACW; Apr 25, 2005 at 10:36 PM.
