Throwing codes Need Help
Thread Starter
On The Tree
Joined: May 2004
Posts: 101
Likes: 0
From: Littleton, CO
Throwing codes Need Help I just got my car emmisions tested and it failed. The mods are in the sig. Im throwing a ses light and the codes are:
P0153 (twice)- PCM determined the response time for Oxygen Sensor 1 in Bank 2 was too slow during testing.
P0132-Input voltage from Oxygen Sensor 1 in Bank 1 is too high for current operating conditions.
P0152-Input voltage from Oxygen sensor 1 in Bank 2 is too high for current operating conditions.
I did install thunder racing 02 sims but those didnt seem to do anything.
My question is will replacing these 2 O2 sensors fix the problem because of my headers.
Any help is appreciated
P0153 (twice)- PCM determined the response time for Oxygen Sensor 1 in Bank 2 was too slow during testing.
P0132-Input voltage from Oxygen Sensor 1 in Bank 1 is too high for current operating conditions.
P0152-Input voltage from Oxygen sensor 1 in Bank 2 is too high for current operating conditions.
I did install thunder racing 02 sims but those didnt seem to do anything.
My question is will replacing these 2 O2 sensors fix the problem because of my headers.
Any help is appreciated
