I was just looking over my buddies BS3 he just got and got some questions the instructions dont seem to answer.

The 3 stage turbo timer, does it give a 12volt out to activate each stage? I am wondering if I can use it as a nitrous control to turn on different stages.

When Turbo stage 2 comes on, does stage 1 turn off, or does it keep 1 on while 2 is on also?

Thanks
Kyle

 

Each stage is to be used with a relay if you want to turn nitrous solenoids on. They are low side drives (i.e provide a ground) The driver is good for about 1 Amp, and if used in PWM mode make sure the valve resistance is greater than 14 ohms assuming a 14 volt battery. People are using the stages to activate nitrous solenoids or boost control valves. There is a timing retard table associated with each stage as a function of rpm. When Stage 2 comes on, Stage 1 stays on.

 

Thanks, I really appericate that, thats exactly what I wanted to know.