How do I pull timing on the spray with ls1edit
Thread Starter
11 Second Club
Joined: Aug 2004
Posts: 891
Likes: 0
From: minneapolis,mn
How do I pull timing on the spray with ls1edit Like the title says. I need to pull timing when I spray Can this be accomplished with ls1 edit or do I need some sort of timing controller? A local tuner shop says it can be done but how do i do it???
Last edited by 1MEANGTO; Aug 16, 2005 at 07:40 PM.
It can be done, but if you pull for spray...you will have less timing when not on the spray. Best bet is to get a Timing Tuner, then you can pull timing only when you spray.
Jason
Jason
You can look in the for sale section or any of the vendors of this site will have them. With ls1 edit, once you make a change to the PCM it stays. To change the settings, you have to reflash the PCM. With the timing tuner, it will only pull timing when system is armed, and you hit your WOT switch. Other than that, you are still running your stock timing.
FormerVendor
Joined: Aug 2005
Posts: 531
Likes: 0
From: Decatur IN.
when you spray you make more power=more grams per cylinder per second=different place in edits timing table... you should do a lot of logging n/a figure out what you n/a limits are then pull timing above and beyond.....
