Replacing MAF
Thread Starter
TECH Addict
iTrader: (10)
Joined: Jun 2004
Posts: 2,918
Likes: 0
From: Commerce Twp, MI
Replacing MAF http://www.powerflowracing.com/prdlist.asp?PG=2&PSG=32
It looks like a "ricer" site. But if you're looking to remove the MAF, there's some 3" tubing and couplers about 2/3's down the page that could make it easier/cleaner looking than a trip to Home Depot.
It looks like a "ricer" site. But if you're looking to remove the MAF, there's some 3" tubing and couplers about 2/3's down the page that could make it easier/cleaner looking than a trip to Home Depot.
Also check out www.bakerprecision.com for turbo silicone hoses that are reasonably priced by the ft in multiple colors! They have 3-3.5" straight pieces for just over $30 that seem real high quality. 
