PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

idle problems

Old 10-05-2005, 10:21 AM
  #1  
12 Second Club
Thread Starter
iTrader: (10)
 
98redorangeta's Avatar
 
Join Date: Sep 2005
Location: From Ohio now in that state up north
Posts: 948
Received 0 Likes on 0 Posts

Default idle problems

Ok i have been working on my friends car and getting it to idle and run better but this is my first camed car and i get get the idel down right for some reason. When it first starts up it wants to surge a little bit and every once in a while usally after about 15 minutes of driving and then 15 minutes of letting it sit it will die on us. He has a patriot 226/226 duration .585 lift cam. Any guesses as to what might solve would be helpful here are the tables i have edited and the values that are there now.

Target idle speed
925 925 900 900 900 900 900 900 900 900 900 900 900 900 900 900
975 975 950 950 950 950 950 950 950 950 950 950 950 950 950 950
975 975 950 950 900 900 900 900 900 900 900 900 900 900 900 900
1025 1025 1000 1000 1000 950 950 950 950 950 950 950 950 950 950 950

Idle air flow
18.10 15.75 13.60 11.80 9.65 9.00 9.00 9.00 9.00 9.00
18.10 15.75 13.60 11.80 9.65 9.00 9.00 9.00 9.00 9.00

Iac Park Position Airflow
33.00 28.00 25.00 24.00 24.00 24.00 24.00 24.00 24.00 24.00
Old 10-05-2005, 04:33 PM
  #2  
12 Second Club
iTrader: (1)
 
silverTA2002's Avatar
 
Join Date: May 2005
Location: Bradenton, FL
Posts: 684
Likes: 0
Received 0 Likes on 0 Posts
Default

Try leaning out your VE table at 400, 800, and 1200 rpm.

Start with 10% lean (multiply values by .9) and keep going from there.
Old 10-05-2005, 06:16 PM
  #3  
TECH Fanatic
iTrader: (1)
 
RedHardSupra's Avatar
 
Join Date: Sep 2003
Location: Laurel, MD
Posts: 1,904
Likes: 0
Received 1 Like on 1 Post

Default

click on my sig, read on, enjoy your new peaceful idle
Old 10-05-2005, 07:38 PM
  #4  
"All Motor 9 Second club member"
iTrader: (60)
 
TXCAMSS's Avatar
 
Join Date: Nov 2001
Location: On the Bumper!
Posts: 3,235
Likes: 0
Received 2 Likes on 2 Posts

Default

Yeah what Redhard said

A lot of hard work and effort went into his write ups as well as several others on the board and it is very very much appreciated. I'd be lost without your help. Thanks guys!


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:57 PM.